Your cart is empty
View our volume discount below:
Why choose for Strap Hinge Galvanized 100 cm - with Slight Bend?
- Very strong thanks to galvanized steel
- Protected against flash rust
Strap Hinge Galvanized 100 cm - with Slight Bend
This strap hinge with slight bend 100 cm is made of very strong galvanized steel. The hinges with slight bend have a blue passivated layer. This makes the hinges look beautiful. This strap hinge with slight bend makes it easy to install fence doors or gate fences. The slight bend causes the door or gate gate to fall slightly inward. This is useful, for example, if you want to attach the fence door to a thicker post. The strap hinges with slight bend 100 cm have 6 mounting holes. The holes have a diameter of 8mm. This makes our carriage bolts galvanized M8 suitable for mounting the Wovar strap hinges. You determine the length of the carriage bolts on the basis of the door thickness. These strap hinges have a 16 mm eye. Therefore, mount these hinges with slight bend in combination with our galvanized 16 mm sheet thumb.
With which bolts do I mount these strap hinges?
You can mount the strap hinges from Wovar with lag screws or carriage bolts. With a door thickness of 35 mm including strap hinge, our M8x30 mm lag screws are sufficient. For thicker doors, it is recommended to attach the strap hinges with our galvanized carriage bolts. Is the door thickness approximately 40 mm? Then use our galvanized carriage bolts M8x50 mm. For a door thickness of 50 mm, choose our galvanized carriage bolts M8x60 mm.
How do I attach strap hinges to my door?
Mount the hinges on the same side as the door hinging direction. Will the door open to the outside? Mount the hinges on the outside of the door. If the door opens inwards, mount the handles on the inside of the door. Place the strap hinge in the correct place on the door and mark the screw holes with a pencil. Are you using carriage bolts? Then it is necessary to pre-drill with our 9mm thick hardwood drill. After drilling, slide the carriage bolts through the hole. The semicircular head of the carriage bolts is on the inside of the door. By tapping the head of the carriage bolts with a rubber hammer, the square portion of the carriage bolts under the semicircular head is clamped into the wood. This prevents the carriage bolt from turning when tightening the nut.
If you mount the strap hinges with lag screws, you pre-drill a hole with our hardwood drill 6mm. You will notice that screwing in the lag screw is a lot easier. You mount lag screws in a different way than the carriage bolts, namely the other way around. You screw the lag screw on the same side as the strap hinge. Make sure that each strap hinge mounting hole has a lag screw or carriage bolt.
How many hinges do I need for my garden door?
For doors or gates in your garden that are lower than 120 cm, Wovar recommends using 2 hinges with slabs. The weight of the door also plays an important role with higher doors. For a door heavier than 90 kg it is recommended to use 3 hinges. 2 hinges are sufficient when dealing wiith weights under 90 kg.
How great is the slight bend of this strap hinge?
The slight bend of this hinge is 19 mm. This aligns the back of the rod and the back of the plate thumb. This ensures that your door falls perfectly into the door frame.
Order the modern hinges with slight bend made of blue passivated steel at Wovar. Order at least 10 items and take advantage of our volume discount. Companies in the construction and garden industry benefit from additional benefits such as discounts with a business account.
Do you prefer straight hinges or bent hinges? View our entire range of hinges and hooks.
No reviews for this product yet.