Carriage bolts Galvanized M8 x 60 mm - 10 pieces

The carriage bolts are made of galvanized steel and have a 4.6 quality. The tensile strength of the carriage bolts is therefore 40 kg per mm2. The carriage bolts m8x60 mm are threaded for 24 mm, and the nut and washer are of course included with your purchase.

Carriage bolts M8 x 60 mm

The galvanized carriage bolts m8x60 mm are extremely popular. These size carriage bolts are often used for connecting 20 or 22 mm thick planks. The carriage bolts have a modern look due to the semicircular head. There is a square section under the 20 mm wide head of the carriage bolts. This is approximately 6x6 mm. By tapping the head of the carriage bolt, the square part clamps into the wood. This prevents the bolts from turning while tightening the nut. Use a rubber mallet to clamp the carriage bolts. The rubber hammer does not damage the galvanizing layer. This prevents oxidation at the carriage bolts. The M8 nut must be tightened with a 13 mm wrench.

Order carriage bolts m8

Order the carriage bolts galvanized m8x60 mm in sets of 10 pieces. Gardeners, Construction and DIY companies get extra benefits with a business account such as discounts.

Is this carriage bolt galvanized not quite what you are looking for? Then view our entire range of zinc plated carriage bolts. In addition to galvanized carriage bolts, Wovar also supplies stainless steel carriage bolts and black carriage bolts.