Your cart is empty
View our volume discount below:
Why choose for Strap Hinge Galvanized 95 cm - with Large Bend?
- Very strong thanks to galvanized steel
- Protected against flash rust
Strap Hinge Galvanized 95 cm - with Large Bend
This strap hinge with large bend 95 cm is made of very strong galvanized steel. Because the hinges are blue passivated, they have a beautiful appearance. With this strap hinge with large bend, you can easily install fence doors or gate fences. The large bend makes it possible to mount the hinge hooks at the back of the post. This prevents a draft from getting through your door.
The large bend of this hinge ensures that your door falls 4cm inward. The strap hinges with large bend 95 cm have 6 mounting holes. The holes have a diameter of 8mm. This makes our carriage bolts galvanized M8 suitable for mounting the Wovar strap hinges. You determine the length of the carriage bolts on the basis of the door thickness. These hinges have an eye of 16 mm. Therefore, mount these hinges with a large bend in combination with our galvanized hinge hook 16 mm
With which bolts do I mount these hinges?
You can mount the strap hinges from Wovar with lag screws or carriage bolts. With a door thickness of 35 mm including strap hinge, our M8x30 mm lag screws are sufficient. For thicker doors, it is recommended to attach the strap hinges with our galvanized carriage bolts. Is the door thickness approximately 40 mm? Then use our galvanized carriage bolts M8x50 mm. For a door thickness of 50 mm, choose our galvanized carriage bolts M8x60 mm
Note: for hinges with a 16 mm eye, use M8 bolts and not M6!
How do I attach strap hinges to my door?
Mount the strap hinges on the outside of the door. Place the strap hinge in the correct place on the door and mark the screw holes with a pencil. Are you using carriage bolts? Then it is necessary to pre-drill with our 9mm thick hardwood drill. After drilling, slide the carriage bolts through the hole. The semicircular head of the carriage bolts is on the inside of the door. By tapping the head of the carriage bolts with a rubber hammer, the square portion of the carriage bolts under the semicircular head is clamped into the wood. This prevents the carriage bolt from turning when tightening the nut.
If you mount the strap hinges with coach screws, you pre-drill a hole with our hardwood drill 6mm. You will notice that screwing in the coach screw is a lot easier. You mount coach screws in a different way than the carriage bolts, namely the other way around. You screw the coach screw on the same side as the strap hinge. Make sure that each strap hinge mounting hole has an hour lead bolt or carriage bolt.
How many hinges do I need for my garden door?
For doors or gates in your garden that are lower than 120 cm, Wovar recommends using 2 hinges with hinge hooks. For higher doors it is recommended to use 3 handles. By using 3 hinges, the chance that your door will warp is considerably less.
Order galvanized hinges with a 95cm large bend
Order the modern curved hinges made of blue passivated steel at Wovar. Order at least 10 items and take advantage of our volume discount. Green and construction companies, such as DIY companies, construction companies and gardeners, receive extra benefits at Wovar, such as discounts with a business account.
Is this strap hinge not quite what you were looking for? View the entire range of hinges and hooks here. For example, view our hinges with resistance or hinges straight.
No reviews for this product yet.
Frequently asked questions
Hoe groot is de bocht van deze heng met bocht?
De bocht van hengen met bocht is 40 mm.