Your cart is empty
Gate Stops and Holders
Best Sellers
More and more constructioncompanies, gardeners and timber merchants are choosing Wovar because of
- Extra discounts for large consumers;
- Direct contact with a trained specialist;
- Detailed order history;
Gate Stops and Holders
Installing a gate stop
Installing a gate stop is relatively easy. You will need the following items to install a gate stop:
- 1 SDS-plus hammer drill bit 12 x 160 mm
- 2 coach screws M8 x 50 mm
- 2 washers M8
- 2 nylon wall plugs 12 x 60 mm
- 1 spanner 13 mm
The first step is determining the position of the gate stop. Next, mark the mounting holes and drill the holes for the wall plugs to a depth of approximately 65 mm. Make sure they are straight by using a spirit level. Insert the wall plugs in the holes, and attach the gate stop with the coach screws and washers. Tighten them with the spanner and there you go, you just installed a gate stop.
Ordering a stop or holder for your gate
A gate stop will catch your door to make sure it does not open too far. On the other hand, a gate holder allows you to keep your gate or door open and can easily be released with your foot. Ideal for when you are carrying something. Finally, we offer gate hooks from very small to large.
Order stops and holders for your gate to make sure your gate will never slam against the wall again. Do you own a business? Business owners in the construction and landscaping sector enjoy many advantages with a free Wovar business account. For example, our business clients benefit from a set business discount and get access to a detailed order history.
Is this not quite what you are looking for? Check out our door stops or browse our entire collection of gate hardware.