Gate Fittings for Garden Fence with Cranked Hinges Blue Galvanised

This gate fitting set is provided with 2 modern blue galvanised handles of 60 cm, 2 galvanised hinge hooks, 1 fence lock, 6 M8x30mm lag screws galvanised, 2 carriage bolts M8x60mm galvanised, 12 stainless steel 4x50mm garden screws, 6 stainless steel 4x30mm garden screws, a hardwood drill of 6mm and a hardwood drill bit of 9 mm in thickness.

Install gate hardware set for garden fences

Before you start, it is important to note that you will also need 18 410 stainless steel 4 x 50 mm garden screws, as they are not included in this set.

To mount this set to your garden gate, use the supplied lag screws. There are 3 round holes and 1 square hole in the blue galvanised 60 cm hinge hook. Use the lag screws for the round holes and the supplied carriage bolts for the square hole.

Use the 6mm thick hardwood drill bit to pre-drill the lag screws. Note: do not drill all the way through the garden fence. Pre-drilling 2 cm deep is enough. With the 9 mm thick hardwood drill bit you can drill right through the garden fence. You do this at the place of the square hole of the strap hinge. This is because the carriage bolt is passed through. With the 12 stainless steel 410 garden screws 4x50 mm you can securely fix the hinge hooks. You use the 6 stainless steel 410 garden screws 4x30 mm to mount the gate lock.

* if the garden gate lock is not in stock, a farmer's gate latch set is instead included.

To order

Order this gate hardware set for garden fences at Wovar for the lowest price. Green and construction companies, such as DIY companies, construction companies and gardeners, receive extra benefits at Wovar, such as discounts with a business account.

Is this gate fitting set not quite what you are looking for? View all our gate hardware sets here. Would you rather put together a gate fitting set yourself? View our entire range of hinges and hooks.