Galvanised Roof Tile Screws 6.3 x 75 mm - Per Piece

The self-tapping roofing screws from Wovar are extremely suitable for mounting roof tile sheets and steel corrugated sheets up to approximately 6 mm thick. Due to the sealing ring, the roofing screw does not allow water through and you will not suffer from leakage. The screws have a hexagonal head. It must be tightened with a 10 mm wrench. Because of the drill point, these screws are also called self-tapping screws.

These 6.3 x 75 mm roofing screws are made of galvanised steel and are therefore very strong. If the zinc layer is damaged, the screw can oxidise slightly. Therefore, be careful when mounting the screws for roof tile panels. Do not tighten the roofing screws too much. This will prevent damage to the head of the screw and the sealing ring. When the ring is damaged, the water can no longer be completely stopped. The chance of this happening is small, but it can happen.

Order Screws for Roof Tiles

Order the strong galvanised screws for corrugated steel and roof tile sheets from Wovar for a good price. Gardeners, Construction, and Handyman companies get extra benefits with a business account such as extra discounts.

Is this roofing screw not quite what you are looking for? View our entire range of roofing screws. See our corrugated sheet screws in addition to our roofing screws. These are made for mounting corrugated sheets.