Garden screws Galvanized 5 x 80 mm Torx 20 with cutting point - Box 200 pcs

The 5x80 mm galvanized garden screws from Wovar have a countersunk head with milling ribs underneath. The milling ribs pull the screws extra hard into the wood. This ensures a beautiful finish. The screws are tightened with a torx 20 drive, use a magnetic bit holder for this. The screws are provided with partial thread. This makes the screws suitable for wood on wood constructions.

Advantage of shank ribs with galvanized wood screws

Shank ribs are provided above the threaded part. These shank ribs reduce the tension on the screw and make screwing in the screws easier. Because there is less tension on the screws, optimum strength of the screws is retained. The screw thread of the screws is also quite coarse. This ensures a shorter screw-in torque. This allows you to install more screws per battery charge. The cutting tip makes pre-drilling unnecessary in soft woods. Even the thinnest sheet material does not split. Order the Wovar magnetic bit holders for extra comfort and faster installing of the screws.

It is recommended not to use the screws in damp areas. There is a chance that the galvanized screws will rust if they are damaged. One time too much with a torx 20 bit can be enough. Wovar recommends that you use the stainless steel 410 garden screws in damp areas.

Buy garden screws galvanized 5 x 80 mm

Order the very strong galvanized garden screws 5x80 mm from Wovar. With 5 boxes of 200 pieces, you already benefit from our volume discount. Gardeners, Construction and DIY companies receive extra benefits at Wovar with a business account such as discounts.

Is this garden screw not quite what you are looking for? View our entire range of galvanized garden screws. In addition to galvanized garden screws, wovar also supplies black garden screws. Do you prefer full-thread screws? Then view our range of galvanized full-thread screws.