Joist Hanger Heavy Galvanized for 7 x 20 cm Beams - Each

This joist hanger has 45 screw holes and is suitable for 7x20cm beams. The weight of these beams is no problem for these strong galvanized joist hangers. Because the joist hangers are made of galvanized steel, there is a risk that they will oxidize. Therefore try not to damage the galvanizing layer. This will not happen if the galvanizing layer remains completely intact.

The net inner size of this joist hanger is 71x182mm. The outer size is 178x181 mm. Mount the joist hanger on wood with our chipboard screws.

What is the load-bearing capacity of this joist hanger?

The table below shows the load-bearing capacity of this joist hanger for 7 x 20 cm beams. The table of the Wovar joist hangers applies to T-joints from wood to wood. The meaning of the abbreviations is indicated in the image opposite. For example, DR stands for the load-bearing capacity downwards, DW for the lateral strength and T for the force of the beam or wall. The load-bearing capacity has been tested with a total of 44 galvanized screws 5 x 35 mm. It is recommended to use a minimum of 4.0 mm screws. The load-bearing capacity for fastening with nails has been tested 4x40 mm threaded nails 44 pcs.

The load capacity shown in the table applies to T-joints wood to wood. For fastening with screws, it is recommended to use a minimum of 4.0 mm screws *

Order joist hangers

Order at least 10 joist hangers and take advantage of our volume discount. Companies always benefit from the lowest price at Wovar. Green and construction companies, such as DIY companies, construction companies and gardeners, receive extra benefits at Wovar, such as discounts with a business account.

Is this joist hanger not quite what you are looking for? View our entire range of joist hangers or beam supports here. Are you building a canopy? Also check out our strong wood construction screws.