Joist Hanger Heavy Galvanized for 7.5 x 17.5 cm Beams - Each

This heavy joist hanger is suitable for placing 75 x 175 mm beams. The very strong Wovar joist hangers are at least 2mm thick and have a CE mark. These joist hangers have 43 handy screw holes. This makes a solid mounting possible in any situation.

Wovar joist hangers make it possible to mount beams firmly and quickly. Our chipboard screws 4x40 with torx drive are widely used for screwing.

What is the carrying capacity of this joist hanger?

The load capacity of this Wovar joist hanger is shown in the table below. In the image on the right you can see which abbreviation belongs to which wearing direction. For example, DR stands for the bearing capacity downwards, DW for the lateral strength and T for the force of the beam or wall. The table shows the load-bearing capacity for T-joints from wood to wood. As you can see, the load capacity is higher if you use screws to mount the joist hanger. The load capacity has been tested with a total of 34 galvanized screws 5 x 35 mm. It is recommended to use at least 4.0 mm screws. The load-bearing capacity for fastening with nails has been tested 4x40 mm threaded nails 34 pcs.

The load-bearing capacity shown in the table applies to T-joints wood to wood. For fastening with screws, it is recommended to use at least 4.0 mm screws *

Order joist hangers for 75 x 175 mm beams

Order joist hangers 380x 75 mm for 7.5 x 17.5 beams with the lowest price at Wovar. Take advantage of our volume discount and order at least 10 items. Green and construction companies, such as handymen, construction companies and gardeners, receive extra benefits at Wovar, such as discounts with a business account.

Is this joist hanger not quite what you are looking for? View our entire range of joist hangers or beam supports here. Are you building a canopy? Also check out our strong wood construction screws.