Beam Support Heavy with flange Galvanized for 7 x 19.5 cm Beams - Per Piece

This beam carrier 7 x 19.5 from Wovar made of galvanized steel is very strong. Beam carriers are also called beam supports. The 27 screw holes make it possible to screw the beam supports tightly. Use these beam supports when mounting 7 x 19.5 cm beams.

Fixing the beam carrier

The beam carrier has a total of 27 mounting holes. 20 screw holes have a diameter of 4 mm. 2 screw holes have a diameter of 9 mm and 2 screw holes are 14 mm wide. The beam support is 1.5 mm thick. For the screw holes with a diameter of 4 mm, we recommend our chipboard screws with a thickness of 3.5 or 4 mm. You can fix the larger ones with our galvanized lag screws. Use an M8 zinc plated lag screw for the 9mm holes and an M12 lag screw for the largest 14mm hole.

CE mark

Wovar's steel beam supports have not been tested for load-bearing capacity and do not have a CE mark. If you want to install beam holders that have been tested or provided with a CE mark, we recommend choosing our beam supports.

Order beam support with flange 71 x 195 mm

Order this beam carrier for 71 x 196 mm beams now. Benefit from our high volume discount and order 20 pieces. Green and construction companies, such as DIY companies, construction companies and gardeners, receive extra benefits at Wovar, such as discounts with a business account.

Is this beam support not quite what you are looking for? View our entire range of beam supports or joist hangers here. Or view another beam carrier with flange. Are you building a canopy? Use our very strong wood construction screws.