Joist Hanger Heavy Galvanized for 4.5 x 9 cm Beams - Each

Use this joist hanger for mounting 4.5x9cm beams. The net inner size of these joist hangers is 46x82mm. The outer size of the joist hanger is 140 x 185 mm. Use our chipboard screws to mount the joist hangers.

How strong is this joist hanger?

Below you will find a table in which the load-bearing capacity of this joist hanger is shown for T-joints from wood to wood. The image on the right shows what the abbreviations DR, DW and T stand for. For example, DR means the downward load capacity, DW the lateral strength and T the force of the beam or wall. The load-bearing capacity was tested with a total of 12 galvanized screws 5 x 35 mm. It is recommended to use a minimum of 4.0 mm screws. The load-bearing capacity for fastening with nails has been tested 4x40 mm threaded nails 12 pcs.

The load-bearing capacity shown in the table applies to T-joints wood to wood. For fastening with screws, it is recommended to use a minimum of 4.0 mm screws *

Order galvanized joist hangers

Buy 10 joist hangers and take advantage of our staff discount. Green and construction companies, such as DIY companies, construction companies and gardeners, receive extra benefits at Wovar, such as discounts with a business account.

Is this joist hanger not quite what you are looking for? View our entire range of joist hangers or beam supports here. Are you building a canopy? Also check out our strong wood construction screws.