Joist Hanger Heavy Galvanised for 4.5 x 14.5 cm Beams - Each

Beams of 4.5 x 14.5 cm fall precisely into this joist hanger. The galvanised metal ensures that the beam can withstand heavy loads. In total, this joist hanger has 37 handy screw holes. The net inner dimensions of the joist hanger are 46x140 mm. The outer dimensions of these joist hangers are 150x145 mm.

What is the carrying capacity of this joist hanger?

Below you will find the load capacity of this joist hanger shown in a table. The load capacity applies to T-joints from wood to wood. As you can see, the load capacity is many times higher when using screws. On the right is shown what the abbreviations are for. DR stands for the load bearing capacity down, DW for the lateral strength and T for the force of the beam or wall away. The load-bearing capacity was tested with a total of 28 galvanised screws 5 x 35 mm. It is recommended to use a minimum of 4.0 mm screws. The load-bearing capacity for fastening with nails has been tested 4x40 mm threaded nails 28 pcs.

The load-bearing capacity shown in the table applies to T-joints wood to wood. For fastening with screws, it is recommended to use a minimum of 4.0 mm screws *

Order beam holders galvanized

Order these handy joist hangers suitable for 4.5x14.5 cm beams per 10 pieces and take advantage of our volume discount. Green and construction companies, such as handymen, construction companies and gardeners, receive extra benefits at Wovar, such as discounts with a business account.

Is this joist hanger not quite what you are looking for? View our entire range of joist hangers or beam supports here. Are you building a canopy? Also check out our strong wood construction screws.