Beam Support without flange Galvanized for 4.5 x 14.5 cm Beams - Per Piece

This beam carrier 4.5 x 14.5 cm without flange from Wovar made of galvanized steel is very strong. Beam carriers are also called beam supports. The 14 screw holes make it possible to screw the beam supports firmly. Use these beam supports when mounting 4.5 x 14.5 cm beams.

Fixing the beam carrier

The beam carrier has a total of 14 mounting holes. 11 screw holes have a diameter of 4 mm. 2 screw holes have a diameter of 9 mm and 1 screw hole is 14 mm wide. The beam support is 1.5 mm thick. We recommend our 3.5 or 4 mm chipboard screws for screw holes with a diameter of 4 mm. You can fix the larger ones with our galvanized lag screws. Use an M8 zinc plated lag screw for the 9mm holes and an M12 lag screw for the largest 14mm hole.

CE mark

Wovar's steel beam supports have not been tested for load-bearing capacity and do not have a CE mark. If you want to install beam holders that have been tested or provided with a CE mark, we recommend choosing our beam supports.

Order beam support without flange 46 x 146 mm

Order the beam carrier without flange for 45 x 145 mm beams from wovar. All orders within Europe are delivered in 2-5 business days. Green and construction companies, such as DIY companies, construction companies and gardeners, receive extra benefits at Wovar, such as discounts with a business account.

Is this beam support not quite what you are looking for? View our entire range of beam supports or joist hangers here.