Your cart is empty
View our volume discount below:
Why choose for Door stopper for outside door hot-dip galvanized complete - open model?
- Complete with buffer and gate hook
Door stopper for outside door hot-dip galvanized complete - open model
This Door stopper for outside door open model is made of hot dip galvanized steel. Hot-dip galvanized steel is rust-resistant and ensures a very long life for door stoppers. Thanks to the supplied gate hook, this door stopper puts an end to the slamming of your outside door. The buffer ensures that your door is not damaged when it is blown open.
Install door stopper for exterior doors open model
To mount the door stopper hot-dip galvanized open model, use our full-thread screws galvanized 6.0 mm thick. Are you screwing the door stopper to a wooden surface? Then pre-drill with a 4 mm thick hardwood drill bit. If you mount the door stopper on a stone wall, you must also order 10 x 50 mm plugs. Drill the two holes of approximately 50 mm deep in the wall with our hammer drill 10 x 110 mm. Drill the holes about 20 cm apart and fill them with a plug. Now you screw the door stoppers firmly with, for example, a full-thread screw galvanized 6 x 50 mm.
Order door stoppers for exterior doors
Order the door stopper open model for the lowest price at Wovar. Order 5 pieces and take advantage of our volume discount. Companies in the construction and garden industry receive additional benefits such as discounts with a business account.
Is this door stop open model not quite what you are looking for? View our entire range of door stoppers.
No reviews for this product yet.