Hardwood with countersink drill bit 2 in 1 for smooth decking boards

With this handy countersink drill bit with depth stop, the head of your decking screw will never be countersunk too deep again. This countersink bit with depth stop is often used for smooth decking boards. Countersinks prevent splintering of the wood and countersink the head of our decking screws beautifully. In fact, it is a hardwood with countersink bit. A 2 in 1 drill commonly used for smooth decking boards. This countersink bit is suitable for fastening decking screws of 5.0 or 5.5 mm thick.

The hardwood drill bit of this countersink bit with depth stop is 3.5 mm thick. The drill bit protrudes 25 mm, allowing you to drill 2.5 cm deep. The razor-sharp centering point ensures the hardwood drill bit does not slip. The orange casing does not rotate with the drill bit, preventing it from sinking too deep into your decking board.

The bit has a thickness of 3.5 mm to pre-drill the wood perfectly. At the level of the orange cap, the bit widens to 4.7 mm. This wider section automatically creates a countersunk hole once you reach the desired depth of 25 mm. As a result, the screw head sits beautifully flush with the wood for a smooth, professional finish. This countersink bit is not adjustable in depth and is set precisely right to countersink the head of Wovar decking screws.

Order countersink bit with depth stop

Provide the most beautiful finish for your decking. Choose this countersink drill bit with depth stop and countersink every decking screw to exactly the same depth. Order the countersink with depth stop for the lowest price at Wovar. Business customers in the construction or garden sector benefit from extra benefits such as a discount with a business account.