Chipboard screws Galvanised 5 x 100 mm Torx 20 with cutting tip - Box 200 pcs

The galvanised chipboard screws from Wovar have a torx 20 drive. A torx drive is star-shaped with six vertices. This gives your tool a lot of grip when screwing in the screw. Only use matching Wovar TX 20 bits to fix the screw to avoid damage.

Why chipboard screws torx galvanised from Wovar?

The Wovar galvanised chipboard screw 5x100 mm has a screw thread for 66 mm. This makes the screw very suitable for wood on wood constructions. The wood is pulled tightly together by the partial thread of the screw. The tip of the screws is interrupted by a saw cut. This creates a handy intersection point. This ensures that the thinnest sheet material does not split and makes pre-drilling in softwood superfluous. If you work with hardwood, it is better to choose our stainless steel 410 chipboard screws. Hardwood contains tannic acid. This will affect galvanised screws over time.

Beautiful finish with Wovar chipboard screws

The countersunk head has milling ribs at the bottom. This makes the screws sink even better into the wood. This ensures a beautiful finish. Just above the screw thread, this chipboard screw has shank ribs. These make room for the shaft of the screw. Due to the shank ribs, there is less tension on the screws, so that the optimum strength of the screw is retained. Shank ribs also ensure less screw-in resistance and you can mount more screws per battery charge.

Order galvanised chipboard screws 5 x 100 mm

Buy the galvanised chipboard screws 5x100 mm from Wovar in boxes of 200 pieces. Gardeners, DIY, and construction companies benefit from additional benefits with a business account.

Are these chipboard screws not quite what you are looking for? View all our chipboard screws galvanised torx. In addition to this galvanised partial thread screw, see our full-thread screws, scaffolding wood screws or chipboard screws stainless steel A2.