Beam Support Heavy with flange Galvanized for 4.5 x 14.5 cm Beams - Per Piece

These beam supports for 45 x 145 mm beams are made of galvanized steel. This makes the beam supports with flange very strong. Due to the long flange, this beam support is suitable for laying bricks when erecting the wall. It is also possible to attach the beam support to a wooden beam. The flange then rests on top of the beam to which the beam support is attached. In total, this beam support has 24 mounting holes. If you are still looking for a beam support without a flange, then you have come to the right place.

Fixing the beam support

The beam support thus has a total of 24 mounting holes. 21 screw holes have a diameter of 4 mm. 2 screw holes have a diameter of 9 mm and 1 screw hole is 14 mm wide. The beam support is 1.5 mm thick. We recommend our 3.5 or 4 mm chipboard screws for screw holes with a diameter of 4 mm. You can fix the larger ones with our galvanized lag screws. Use an M8 zinc plated lag screw for the 9mm holes and an M12 lag screw for the largest 14mm hole.

Are you looking for a black beam support? Then take a look at our black beam supports. If you are going to work with lighter materials, you can use a control carrier.

CE mark

Wovar's steel beam supports have not been tested for load-bearing capacity and do not have a CE mark. If you want to install beam holders that have been tested or provided with a CE mark, we recommend choosing our beam supports.

Buy beam support 46 x 146 mm

Order these reliable beam carriers at Wovar, your wholesaler in screws and hardware. Take advantage of the volume discount and order at least 20 beam carriers and take advantage of our volume discount. Green and construction companies, such as DIY companies, construction companies and gardeners, receive extra benefits at Wovar, such as discounts with a business account.

Is this beam support not quite what you are looking for? View our entire range of beam supports or joist hangers here. Are you building a canopy? Check out our very strong wood construction screws. Or if you need to attach pieces of wood to each other, use our coupling plates. If your fence goes around the corner and you want to finish it nicely, use our strong corner connectors.