Shelf Bracket with Expansion Bolt of 220 x 30 mm - Per Piece

Installing a shelf bracket in bricks or concrete? Then use Wovar's shelf bracket with expansion bolt 220 x 30 mm for an almost 'hidden' mounting. Because this shelf bracket does not use a brace, you can place it very close to other objects such as a radiator. Shelf brackets with an expansion bolt are also called pipe shelf brackets.

Mount Invisible Shelf Brackets of 220 x 30 mm

When mounting the shelf bracket, use a hammer drill SDS-plus Premium with 2 cutting edges 16 x 160 mm, it will drill a perfect hole in brick or concrete. Then slide the expansion bolt into the hole. The expansion bolt is 55 mm long from the shelf bracket. By turning the nut on the front of the shelf bracket, the expansion bolt will anchor itself in the hole.

Note: The load-bearing capacity of this shelf bracket is calculated on a full brick or concrete wall.

The load-bearing capacity is approximately 160 kg per 2 pieces when properly assembled if you place them a maximum of 80 cm apart. The shelf bracket itself is 220 mm long and 30 mm wide. The holes on the shelf bracket are perfect for 3.5 mm thick full-thread screws. If using a hardwood plank, predrill with a 2mm hardwood drill bit.

Ordering your Heavy Shelf Bracket

At Wovar you order the shelf brackets with an expansion bolt for the lowest price. Handyman companies, construction companies, and gardeners receive extra benefits such as a discount with a business account.

Is this Galvanised shelf bracket not quite what you are looking for? Then take a look at our entire range of shelf brackets. Wovar also supplies white shelf brackets, aluminium shelf brackets, industrial shelf brackets, black metal shelf brackets, leather shelf brackets, and floating shelf brackets.