Round Post Holder Black on Plate Ø10.1 x 15 cm - Per Piece

The round post holders on plate are ideal to use if you want to place a fence or roof on hardwood or concrete. With this post holder, you can easily place round posts on a stone, concrete, or hardwood surface. The post holder is suitable for posts with a diameter of 100 mm and a length of 15 cm.

Post holder black

We recommend ordering the wood thread bolts for optimal convenience. Are you mounting the post on hardwood? Then first pre-drill with a hardwood drill bit. When mounting it on concrete or stone, you need a masonry drill bit and some nylon plugs. Do you want an extra strong fastening? Then use the wedge anchors. Note, do not use these bolts when mounting the post holder on tiles. The tension from the wedge anchors can cause cracks in the tiles.

Once you have all the necessary materials at your disposal, you can start mounting. First determine the location of the post holder and mark it with screw holes. Then pre-drill the holes with a hardwood drill bit; for concrete, of course, use a masonry drill bit. It is important that the holes in the concrete have a depth equal to the length of the wood thread bolts you will use. Finally, fasten the wood thread bolts and you can place the post.

Buy round post holder

Order the post holders for good quality at Wovar! Is this post holder not exactly what you are looking for? Then view the entire range of post holders.