Joist Hanger Heavy Galvanized for 3.8 x 14 cm Beams - Each

This joist hanger is suitable for mounting 3.8 x 14 cm beams. The joist hangers are made of galvanized steel and therefore very strong. This joist hanger is often used in combination with SLS spruce beams of 38 x 140 mm. The 29 screw holes makes mounting the joist hangers very easy. The CE mark means that the joist hanger meets the legal requirements in the field of safety, health and the environment. Use our stainless steel 410 or galvanized chipboard screws for installation.

Wovar joist hangers are suitable for heavy-duty cross beams. The net inner size of this joist hanger is 40 x 130 mm. The outer size is 140 x 135 mm. Are you mounting the joist hangers on stone or concrete surface? Then it is necessary to pre-drill. Marking is easy by holding the joist hanger in the right place and marking the screw holes with a pencil. Remove the joist hanger and you can start drilling. Because the joist hangers are made of galvanized steel, it is important that they are not damaged. In this way you prevent the joist hangers from oxidizing.

What is the carrying capacity of this joist hanger?

The Wovar joist hanger have a CE mark. This means that this beam holder has been tested for strength and bearing capacity. In the diagram below you will find the load capacity of this joist hanger for 3.8 x 14 cm beams. In the image on the left you can see in which direction the forces are indicated by means of abbreviations. For example, DR stands for the bearing capacity downwards, DW for the lateral strength and T for the force of the beam or wall. The load capacity depends on the mounting method. When choosing to use screws, the load-bearing capacity is considerably higher than when nails are used. The load-bearing capacity has been tested with a total of 24 galvanized screws 5 x 35 mm. It is recommended to use a minimum of 4.0 mm screws. The load-bearing capacity for fastening with nails has been tested 4x40 mm threaded nails 24 pcs.

The load-bearing capacity shown in the table applies to T-joints wood to wood. For fastening with screws, it is recommended to use a minimum of 4.0 mm screws *

Order joist hangers

Order a minimum of 50 joist hangers and take advantage of our staff discount. Companies always benefit from the lowest price at Wovar. Green and construction companies, such as DIY companies, construction companies and gardeners, receive extra benefits at Wovar, such as discounts with a business account.

Is this joist hanger not quite what you are looking for? View our entire range of beam supports or joist hangers here. Are you building a canopy? Also check out our strong wood construction screws.