Carriage bolts Galvanised M8 x 30 mm - 10 pieces

The M8x30 mm carriage bolts from Wovar are of an extremely strong quality. The galvanised steel makes them virtually indestructible and suitable for heavy constructions. Only when the galvanizing layer is damaged can the carriage bolts oxidise. The carriage bolts have a quality of 4.6. This means that the carriage bolts have a tensile strength of 40 kg per mm2. The carriage bolts are threaded for approximately 30 mm.

Zinc plated carriage bolts and rust

The galvanised carriage bolts from Wovar are supplied with a washer and nut as standard. You need a size 13 to tighten the M8 nut. Tap in advance with a rubber hammer on the approximately 20 mm wide head of the carriage bolt. The square part under the semicircular head now clamps into the wood. This prevents the carriage bolt from turning. By using a rubber hammer you will not damage the galvanised carriage bolts. This keeps the zinc layer intact and prevents corrosion.

Order carriage bolts M8 x 30 mm

Order our high-quality carriage bolts galvanised and discover the very strong quality. Benefit from a high volume discount and order a full box of 200 pieces! Gardeners, Construction and DIY companies get extra benefits with a business account such as discounts.

Is this carriage bolt galvanised not quite what you are looking for? Then view our entire range of zinc plated carriage bolts. In addition to galvanised carriage bolts, Wovar also supplies stainless steel carriage bolts and black carriage bolts.