Carriage bolts Galvanised M6 x 150 mm - 10 pieces

Carriage bolts galvanised ensure a strong fastening. These galvanised carriage bolts 6x150 mm are supplied complete with nut and washer. You use them, for example, when attaching 6 cm thick beams to 8 cm thick posts. The carriage bolts are 6 mm thick and 15 cm long, the diameter of the head is approximately 16 mm wide.

To attach the wood, pre-drill a hole with a wood drill bit that is 1 mm thicker than the carriage bolt, in this case a 7 mm drill. Because the carriage bolt is long, it is best to use an auger drill bit. This will allow the carriage bolt to easily slide through the wood. Then hammer the galvanised carriage bolt into the wood with a rubber hammer. This means that you will not damage it, which prevents oxidation. Because of the square under the head, the carriage bolt will attach itself to the wood, so that it no longer turns when the nut is tightened. When fitting the nut, do not forget to place the ring in its middle, so that damage to the wood is prevented.

Buy carriage bolts galvanised M6 x 150

The carriage bolts are sold per set of 10 pieces. Gardeners, construction and handymen get extra benefits with a business account such as discounts.

Is this carriage bolt galvanised not quite what you are looking for? Then view our entire range of zinc plated carriage bolts. In addition to galvanised carriage bolts, Wovar also supplies stainless steel carriage bolts and black carriage bolts.