Carriage bolts Galvanised M12 x 280 mm - Per Piece

This zinc plated carriage bolt m12 x 280 mm comes complete with nut and washer and can be ordered per piece. Carriage bolts 28 cm long are used for connecting 2 wooden parts that together have a thickness of up to 260 mm. Thick galvanised carriage bolts have an enormous load-bearing capacity. This is because galvanised steel is extremely strong. The disadvantage of galvanised steel is that it can rust. If this is absolutely not allowed, we recommend using stainless steel carriage bolts.

Mount carriage bolts galvanized

Pre-drill this carriage bolt with a 13 mm thick auger drill bit for wood. This way you can easily pull the carriage bolt through the hole and install it easily. The length of this zinc plated carriage bolt m12x280 mm is measured from the bottom of the pin to the flat side of the semicircular head. Under the semicircular head is another square part. This clamps in the wood so that the bolt does not turn when the nut is tightened. Tip: Tap the head with a rubber mallet. This ensures that the carriage bolts are not damaged. This will prevent corrosion.

Order carriage bolt m12 x 280 mm

Order these large carriage bolts m12 x 280 mm each for the lowest price at Wovar! Wovar always supplies carriage bolts complete with nut and washer. Super handy! Do you have a construction company, handyman or landscaping company? Create a business account to take advantage of extra benefits such as a discount.

Is this thick carriage bolt galvanised m12 not quite what you are looking for? View all our carriage bolts galvanized. We also supply carriage bolts in stainless steel and even carriage bolts in black.