Carriage bolts Galvanised M10 x 240 mm - 10 pieces

These 24 cm long galvanised carriage bolts are supplied complete with nut and washer. The length of 240 mm makes it possible to connect beams of 12 and 10 cm together. Pre-drill in the wood with an 11 mm thick hardwood drill.

The zinc coating protects this M10 carriage bolt well against rust and corrosion. Therefore, try not to damage the zinc plated carriage bolts when mounting. For example, use a rubber mallet to clamp the square section under the 24mm wide semicircular head into the wood. The nut supplied must be tightened with a 17mm wrench.

Buy carriage bolts galvanised M10 x 240 mm

Order the Wovar carriage bolts M10 x 240 mm. Companies in the construction and gardening industry are advised to sign up for a business account to take advantage of additional benefits such as discounts.

Is this carriage bolt galvanised not quite what you are looking for? Then view our entire range of zinc plated carriage bolts. In addition to galvanised carriage bolts, Wovar also supplies stainless steel carriage bolts and black carriage bolts.