Black Screws Galvanised 4 x 50 mm Torx 20 with Cutting Point - 100 Pieces

These black torx screws with partial thread are 4mm thick and 50mm long. The screw is partly threaded. This makes the black screws 4x50mm extremely suitable for wood on wood constructions. The partial wire ensures that the wood is pulled tightly together.

The black screws from Wovar have a countersunk head. This countersunk head sinks beautifully into the wood. This ensures a nice finish. The extra deep torx 20 impression gives your machine a lot of grip when screwing in the screws. Use our Wovar torx 20 bits for this. These fit perfectly and make the chance of damage to the screw almost impossible.

A big advantage of these black screws is the razor-sharp cutting tip. It cuts effortlessly through all types of wood and does not split even the thinnest sheet material. You do not need to pre-drill for soft or coniferous wood. This is recommended for hardwood. Our hardwood drill bits 3.0 mm are suitable for this. The high-quality black delta-coll coating protects the screws well against rust and corrosion. After this deep black coating, a black top layer was applied. This creates a beautiful shiny effect.

Black galvanised torx screws 4 x 50 mm

Choose our black screws 4x50mm. Gardeners, Construction, and DIY companies receive extra benefits at Wovar with a business account such as discounts.

Is this black screw not quite what you are looking for? View our full range of black screws or chipboard screws. See also our blue galvanised torx screws, chipboard screws black, scaffolding wood screws or strong stainless steel 410 screws.