Slide Bolt Galvanized - 100 x 50 mm

Are you looking for a slide bolt that you can easily lock? With this padlock bolt for garden gates, gate fences and fence doors you can easily lock. The galvanized gate lock 100 x 50 mm is suitable for padlocks with a maximum thickness of 9 mm. Because this padlock bolt has no less than 2 lock eyes, it does not matter which direction of rotation your gate has. This makes the slide bolt universal. The gate slide with lock eye is made of galvanized steel. This type of steel is very strong but can oxidize after damage to the zinc layer.

The round sliding pin of this padlock bolt is approximately 10 mm thick. You extend the pin up to 30 mm. Make sure that the distance between the plate latch and the supplied hook is no more than 20 mm. Use our strong galvanized full thread screws 4 mm thick to mount the gate slide. In total, the bolt has 8 mounting holes. It is important to the strength of your fence to use each mounting hole. Are you mounting the plate latch on a hardwood garden fence? Then pre-drill the screws with a 3 mm hardwood drill.

Order gate slide with lock eye 100 x 50 mm

Order the galvanized padlock bolt with lock eyes and keep unpleasant guests out of your garden. Companies in the construction, DIY or garden sector receive extra benefits such as a discount with a business account. Are you a bulk consumer? Order at least 10 sliding locks and take advantage of a high volume discount.

Is this padlock bolt not quite what you are looking for? View our entire range of plate latches and fence closures.