Pointed Post Anchor 12.1 x 12.1 x 90 cm - Per piece

With this pole anchor with point 121x121x900 mm from Wovar, you can easily attach 12 x 12 cm posts. The pole anchor is made of galvanised steel. This makes the pole anchors very strong. When installing pole anchors 12x12 cm, it is recommended to add rapid cement. This provides extra strength.

How do I place Pointed Post Anchors for 12 x 12 cm posts?

When placing pole anchors with a point, make a hole approximately 80 cm deep and 40 x 40 cm wide. Place a piece of scrap wood in the pole anchor when you want to hammer it into the ground. This ensures that the pole anchor is not damaged. Place the pole anchor at a height so that the bottom of the post-holding section is just above the ground. You screw the posts firmly to the pointed pole anchors with our Wovar coach screws. Use our galvanised m8 x 50 lag screws for this pole anchor. Just pre-drill with our 6 mm hardwood drill bit and you can start.

If you place a fence in a place with a lot of wind, it is wise to place braces in the corner. Let the pole float 3 to 4 mm in the pole anchor. The holes at the bottom ensure that the moisture that runs down from the post can easily drain away. This prevents your wood from rotting.

Order Pointed Post Anchors for 12x12 cm Posts

Order the Pointed Post Anchors at Wovar, your wholesaler in screws and hardware. Discover our volume discount and order at least 5 pieces. Companies in the construction and garden industry benefit from extra benefits such as discounts with a business account.

Is this Pointed Post Anchor not quite what you are looking for? View our entire range of post holders, or some post bases here. We also offer handy pergola brackets for making pergolas.