Hammer Fixings 6 x 80 mm - Per 10 pieces

A hammer fixing 6 x 80 mm is used to fix wooden planks, battens or beams of maximum 4 - 5 cm thick to a stone or concrete wall. This hammer fixing 6 mm thick is suitable for anchors that are not loaded too heavily. So not suitable for building a roof where you attach a supporting beam to your wall.

Hammer fixings 6 and 8 mm thick from Wovar have a Pozidrive drive. This allows you to easily remove the hammer fixings. As it were, you unscrew the screw from the fixing again, so that the tension decreases. Use a hammer to clamp the screw in the fixing causing it to expand. You then drive the screw into the wall, causing the fixing to expand. Drill a hole with a diameter of 6.0 mm in the stone of approximately 35 mm deep. Are you using wood thinner than 5 cm? Then you drill a little deeper. You determine the depth with the following sum: fixing length - wood thickness + 1 cm.

For drilling in stone/concrete, choose our SDS plus hammer drill 6 x 110 mm. To drill into the wood, choose our 6.0 mm hardwood drill. Companies in the construction and garden sector receive additional benefits such as a discount with a business account.

Is this hammer fixing not quite what you are looking for? View our entire range of hammer fixings. If desired, Wovar also supplies nylon plugs separately. We deliver plugs, screws and hardware everywhere in Europe.