Draught excluder aluminium 100 cm for gaps up to 20 mm - Per piece

Want to close the gaps around your interior door or sliding door? With this aluminium draught exluder with brush those gaps will remain closed for a long time. This strip can be used for interior doors and sliding doors with a maximum gap of 20 mm. You can attach the draught excluder on the door with a useful adhesion strip. You only need to cut the strip to size with a small hacksaw.

Draught excluder with hairs

Installing this draught excluder is simple. First, measure the required length and cut the strip to size with a hacksaw. Next, you can start with the attachment to the bottom of your door. The draught excluder has a self-adhesive strip, which makes installing it a breeze.

1. Choose where you want to attach the draught excluder.
2. Remove the protective layer from the adhesion strip.
3. Stick the draught excluder to the door.

Important: Before attaching the strip, measure the required height. The hairs should just touch the floor. Note: the gap cannot be bigger than 20 mm. In the second image you will find an example of the measurements. 

Ordering a draught excluder

You can buy a draught excluder with hairs for a competitive price at Wovar. This way, the temperature in your house stays the same and you will no longer be bothered by that breeze in your neck. Companies in the construction, DIY, or gardening industry can benefit from many advantages with a business account. For example, you get a set business discount and your own liaison at Wovar.

Is this draught excluder not exactly what you are looking for? Take a look at our other draught excluders to find the right one for you.