Door handle with backplate aluminium butterfly model - Per Set

This door handles with shield, are made of high-grade aluminium and has beautiful butterfly-style door handles, which widen slightly at the ends. This door hardware consists of 2 door fittings, 2 door handles and a handle backplate. Included in this door hardware set are two door handles, one of which comes with a pre-mounted door handle spindle. Also included are two matching Aluminium door handle backplates. In these door handle backplates there are two screw holes for fastening to the door and, if required, a keyhole ó/or hole for cylinder lock

It is very important that you choose the right variant locking method of the door handle backplates to match your door lock. You measure the correct size by measuring the centre-to-centre distance from door handle to keyhole. Size available in this are:

Blind; suitable for interior doors that are not lockable, so-called wicket doors
SL56; suitable for keyhole with a centre-to-centre distance from door handle of 56 mm
SL72; suitable for keyhole with a centre-to-centre distance from door handle of 72 mm
PC55; Suitable for cylinder lock with a centre-to-centre distance to door handle of 55 mm
PC72; Suitable for cylinder lock with a centre-to-centre distance to door handle of 72 mm

Choose the right size Door handle backplate to go with your door handles for your interior doors, this way you will have the same handle on each door which ensures a nice look. For a complete overview of all our door handles with shield, see the full selection door hinges on shield.

Aluminium door fitting

• Door handle: Has a length of 11 cm and a width of 1.9 cm. The distance from the door handle backplate to the top of the door handle is 4.8 cm.

• Door handle backplate: Has a length of 18 cm and a width of 4.1 cm. Wovar recommends 4 x 25 mm Galvanised screws or matching patent screws for mounting. Don't have these yet? Then easily include them in your order.

  Mount aluminium door fitting with shield

  1. Place the door handles on both sides of the door against the door. Mark out the handle hole, any keyhole or cylinder lock and the mounting holes of the door shields with a Carpenter's pencil.
  2. Use a butterfly drill bit to easily drill out the holes for the door handle and any keyhole 
  3. Pre-drill the mounting holes lightly with a 2 mm hardwood drill bits for screws ó with a 4 mm drill bit for patent screws.
  4. Fix the Door handle backplates to the door with the full-thread screws or patent bolts. 
  5. Place the door handle with the handle spindle in the door and attach the loose door handle to it with the supplied fixing ball. tighten it firmly with a 3 mm allen key.

  Order door handle with aluminium shield

  Order your aluminium door handles with shield now at Wovar!