Galvanized Roof Tile Screws 6.3 x 60 mm - Per Piece

Wovar's self-tapping roof tile screws are ideal for mounting corrugated steel sheets up to 6 millimeters thick and roof tile sheets. The high-quality EPDM sealing ring ensures that the mounting hole does not allow water to pass through. Because of the drill point, these screws are also called self-tapping screws. The screws have a hexagonal head. It must be tightened with a 10 mm wrench. These 6.3 x 60 mm roof tile sheet metal screws are made of galvanized steel and therefore very strong. If the zinc layer is damaged, the tile sheet screw can oxidize slightly. Therefore, proceed with care when mounting these screws for tile sheets. Do not tighten the roof tile screws too far. This prevents damage to the head of the screw and the sealing ring. When the ring is damaged, the water can no longer be completely stopped. The chance of this happening is small, but it can happen.

Order Roof Tile Screws online

Order the strong galvanized screws for corrugated steel and roof tile sheets from Wovar for a good price. You already benefit from our volume discount with an order of 50 pieces. With an order of 100 roofing screws, you get an extremely competitive price. Gardeners, Construction, and Handyman companies get extra benefits with a business account such as extra discounts.

Is this roofing screw not quite what you are looking for? View our entire range of roofing screws. See our corrugated sheet screws in addition to our roofing screws. These are made for mounting corrugated sheets.