Roofing nails stainless steel with sealing ring 4 x 65 mm - Box 100 pieces

Roofing nails stainless steel with sealing ring 4 x 65 mm. They are also known as corrugated iron nails. Roofing nails are widely used for installing corrugated sheets and sheet materials for walls and roofs. The roofing nails must be mounted in a wooden substructure. With corrugated sheets, make sure that the wave is no higher than 30 mm. This gives the roof nages enough adhesion in the wood, creating a strong anchoring.

Avoid damage when installing stainless steel roofing nails

In order not to damage corrugated sheets and other sheet material, it is recommended to pre-drill with a 3 mm drill. Use our 3 mm thick metal drill for this. The mounting hole is well sealed due to the high-quality neoprene ring. For a good seal with corrugated sheets, you should always drive the roofing nails into the top of the corrugations. These corrugated iron nails are made of stainless steel A2 steel. Stainless steel A2 is slightly less strong than galvanized, but will not oxidize. As a result, there is a good chance that the stainless steel corrugated iron nails have a longer life.

For a firm fastening, place a roof nail in both height and width. As indicated above with corrugated sheets, only install roofing nails in the wave heights. You can now calculate how many roofing nails you will need for your roof.

Construction and DIY companies benefit from additional benefits such as discounts with a business account. Do you prefer to mount corrugated sheets or roof tile sheets with screws? Then take a look at our corrugated sheet screws.