Overlapping Latch Yellow Galvanized - 430 mm

This yellow galvanized overlapping gate latch is an ideal closure to close 2 gate gates. Because the latch is yellow galvanized, it is often used in combination with our cross hinges galvanized yellow. Yellow galvanized steel colors beautifully on larch douglas wood. Place the 2 plates of this transfer latch yellow approximately 8 cm apart. It is possible to close the overlapping gate latch with a padlock. This padlock may be a maximum of 4 mm thick.

It is also slightly better protected against rust than normal galvanized steel. Mount the overlapping gate latch with our 4 mm thick galvanized full thread screws. You need a total of 12 screws for a secure anchoring. When mounting the overlapping gate latch on hardwood you need to pre-drill. Use our 3.0 mm hardwood drill bit for this.

In addition to our yellow galvanized overlapping gate latch, also see our overlapping gate latch galvanized, overlapping gate latch black or farmer gate latch galvanized.