Chipboard screws Stainless Steel 410 4 x 50 mm Torx 20 with cutting point - 200 pieces

The stainless steel 410 chipboard screws 4 x 50 mm from Wovar have a torx 20 drive. This will keep your machine from slipping when driving in the screws. In addition, our chipboard screw is provided with partial thread. This makes our chipboard screws suitable for wood to wood constructions. The end of the screw contains a cutting point. This cutting point ensures that the chipboard screws are quickly driven into the wood and that thin wood material does not split.

Milling and shank ribs

The chipboard screws have a countersunk screw head (7 mm thick) with milling ribs at the bottom. The milling ribs ensure that the screw sinks nicely into the wood. Above the screw thread, the screws are provided with shank ribs. The shank ribs take the tension off the screws during assembly. In this way, optimum strength of the screws is retained. The shank ribs also reduce screw-in resistance. This ensures that you fit more screws per battery charge.

The stainless steel 410 quality makes these chipboard screws just as strong as galvanised screws. You will notice that the screw head does not snap off when screwed in. This is often the case with normal stainless steel A2 quality screws. When working with hardwood, it is recommended to pre-drill. Our hardwood drill 3 mm is suitable for this. Do you prefer to work with galvanised screws? Then have a look at our galvanised chipboard screws.

To order

Order our chipboard screws stainless steel 410 4 x 50 mm in boxes of 200 pieces. Gardeners, DIY, and construction companies benefit from additional benefits with a business account such as discounts.

Are these screws not quite what you are looking for? View our full range of chipboard screws or scaffolding wood screws here. Always use our special 410 stainless steel decking screws for mounting decking boards.